Plain & Reinforced Concrete Experiments

Experiment No. 1:

Standard test method for the determination of the normal consistency of the hydraulic cement. (BS-12)

Experiment No. 2:

Standard test method for the determination of the initial and final setting time of the hydraulic cement by Vicat needle apparatus.

Experiment No. 3:

Standard Test Method for Sieve Analysis of fine and coarse aggregates from different sources. (ASTM C136-05)

Experiment No. 4:

Determination of the aggregate impact value of different coarse aggregate samples. (BS 812)

Experiment No. 5:

Standard test method for the determination of Bulk Density (i.e. unit weight and the voids in aggregates). (ASTM C-29/C-29M)

Experiment No. 6:

Standard test method for the determination of relative density (i.e. specific gravity) and water absorption of the coarse aggregates. (ASTM C-127-04)

Experiment No. 7:

Standard test method for the slump of hydraulic cement concrete. (ASTM C-143/C-143 M-03)

Experiment No. 8:

To perform the compacting factor test.

Experiment No. 9:

Standard test method for the determination of the splitting tensile strength of cylindrical concrete specimen. (ASTM C 496/C 496 M-04)

Experiment No. 10:

Determination of the tensile strength of concrete by Double Punch Test. (Non-Standard Test)

Reinforced Concrete Experiments, Reinforced Concrete Experiments, Reinforced Concrete Experiments, Reinforced Concrete Experiments, Reinforced Concrete Experiments

Leave a Reply

Your email address will not be published.

*